Ultramid A 205F NATURAL
PA66BASFsupply any additional information. Safety Information Detailed information regarding safety are available on the safety data sheet (SDS). SDS is sent with the first material order or available by contacting our customer services Regulations Compliance This product is not intended to be used for the following regulated market: food contact, drinking water, toys, cosmetics or medical devices. This grade complies with ROHS Directive 2011/65/EU and 2015/863 as amended. Grades produced or imported in Europe comply with REACH directive 1907/2006/EC as amended. Customer Services Our customer services are not only concerned with manufacturing and supply of Engineering Plastics products. We are available to assist our customers in finding technical solutions that meet their requirements. Specific support is in particular offered on: - Material selection - Material testing - Parts design advice, training for design engineers - Part testing - Design simulation - Processing through different technologies - Assembly and post-processing technology expertise - Parts optimization through Computer Aided Design -- 1 of 3 -- Ultramid® A 205F NATURAL 67056 Ludwigshafen, Germany
물성치 데이터
Typical values for uncoloured product at 23°C
| 물성 항목 | 시험 방법 | 단위 | 건조 (Dry) | 조습 (Cond.) |
|---|---|---|---|---|
| properties | ||||
| excellent filling qualities and sections | UL 94 | V2 under 0.4 mm. It is particularly suitable for the moulding of long parts with thin wall | ||
| European Railways Certifications dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4h. | - | GE HL2; European Railways Certifications - EN 45545-2 HL2 | ||
| X38CrMoV5-1 (EN Norm) temperature of up to 120°C can be considered. injection machine size, part geometry / design. and it is in no way binding. This information must on no account be used as a substitutive for necessary prior tests which alone can ensure that a product is suitable for a given use. ANY WARRANTY OF PRODUCT PERFORMANCE, for ensuring compliance with local legislation and for obtaining the necessary certifications and authorizations. Users are requested to check that they are in possession of the latest version of this document, and BASF SE is at their disposal to supply any additional information. or available by contacting our customer services medical devices. available to assist our customers in finding technical solutions that meet their requirements. Specific support is in particular offered on: | - | 1.2367 | 1.2343 (DIN Norm). In the case of high requirements on surface quality a mould | |
| North America | - | - | + | |
| Asia Pacific | - | - | + | |
| South and Central America | - | - | + | |
| Near East/Africa | - | - | + | |
| Processing: Injection moulding (M), Extrusion (E), Blow moulding (B) | - | - | M | |
| Pellets | - | - | + | |
| Molding shrinkage (parallel) | ISO 294-4 | % | 1.70 | |
| Molding shrinkage (normal) | ISO 294-4 | % | 1.70 | |
| Water absorption, 24 h in water, 23 °C | ISO 62 | % | 1.3 | |
| Moisture absorption, equilibrium 23°C/50% r.h | similar to ISO 62 | % | 3.00 | |
| Density | ISO 1183 | kg/m³ | 1140 | - |
| mechanical | ||||
| Tensile modulus | ISO 527-1/-2 | MPa | 3200 | 1400 |
| Yield stress, 50 mm/min | ISO 527-1/-2 | MPa | 85 | 50 |
| Stress at break | ISO 527-1/-2 | MPa | 60 | 40 |
| Yield strain, 50 mm/min | ISO 527-1/-2 | % | 4 | 10 |
| Strain at break | ISO 527-1/-2 | % | 50 | 250 |
| Flexural modulus | ISO 178 | MPa | 3000 | 1300 |
| Flexural strength | ISO 178 | MPa | 120 | 50 |
| Charpy notched impact strength | ISO 179/1eA | (23°C) ISO 179/1eA kJ/m² | 5 | 10 |
| Charpy impact strength | ISO 179-1eU | (23°C) ISO 179/1eU kJ/m² | N | N |
| Izod notched impact strength | ISO 180/A | (23°C) ISO 180/A kJ/m² | 5 | 8 |
| thermal | ||||
| HDT B (0.45 MPa) | ISO 75-1/-2 | °C | 205 | |
| HDT A (1.80 MPa) | ISO 75-1/-2 | °C | 65 | |
| Melting temperature, DSC (10°C/min) | ISO 11357-1/-3 | °C | 263 | |
| electrical | ||||
| Surface resistivity | IEC 62631-3-2 | Ohm | * | 1E14 |
| Volume resistivity | IEC 62631-3-1 | Ohm*m | 1E15 | 1E15 |
| Electric strength (d = 0.8 mm) | IEC 60243-1 | kV/mm | 35 | - |
| Electric strength (d = 2.0 mm) | IEC 60243-1 | kV/mm | 22 | - |
| Relative permittivity (1 MHz) | IEC 62631-2-1 | - | 3.5 | - |
| Dissipation factor (1 MHz) | IEC 62631-2-1 | E-4 | 0.033 | - |
| Comparative tracking index, CTI, test liquid A | IEC 60112 | - | 600 | 600 |
| Comparative tracking index, CTI M, test liquid B | IEC 60112 | - | 550 | - |
| flammability | ||||
| Burning Behav. at 1.6 mm nom. thickn. | IEC 60695-11-10 | class V-2 | ||
| Burning Behav. at thickness 0.4 mm | IEC 60695-11-10 | class V-2 | ||
| Burning Behav. at thickness 0.8 mm UL-94, | IEC 60695 | class V-2 | ||
| Burning Behav. at thickness 3.2 mm UL-94, | IEC 60695 | class V-2 | ||
| Glow Wire Flammability Index (1.6 mm) | IEC 60695-2-12 | °C | 800 | |
| Oxygen index | ISO 4589-1/-2 | % | 28 | |
기술 자료
관련 PA66 Grade
Glass fiber reinforced injection moulding grade with high stiffness, very good flowability, and excellent heat ageing resistance up to at least 220 °C for technical articles.
Glass fibre reinforced injection moulding grade with good resistance to hydrolysis, suited for processing by water injection technology (WIT). Applications in the automotive cooling circuit, e.g. cooling water pipes.
Glass fibre reinforced injection moulding grade with good resistance to hydrolysis. I.e.: for applications in automotive cooling circuit. This product can also be offered as BMBcert™ and/or Ccycled™. Due to the Massbalance approach the product properties do not change.
Glass fibre reinforced and heat aging resistance injection moulding grade for industrial articles having very high rigidity.
Glass fibre reinforced and heat aging resistance injection moulding grade for industrial articles having very high rigidity. Material models for crash simulation with Ultrasim™ are available.
Glass fibre reinforced injection moulding grade with optimised heat ageing performance for industrial articles having very high rigidity.