Ultramid D3EG12 Aqua BK00102

Glass fibre reinforced and heat aging resistant injection moulding grade, e.g.used for automobile parts with high stiffness requirements under the hood. The products can also be offered as BMBcert™ and/or Ccycled™. Due to the Massbalance approach the product properties do not change.

Deep Gloss D3K R01 BK23361 03/2026 PA Guoco Midtown #18-01, 128 Beach Road, Singapore 189773 Ultramid® Deep Gloss D3K R01 BK23361 is an easy-flowing, UV-stabilized polyamide for injection molding. This grade has excellent surface appearance for high-gloss applications and was designed to offer high level scratch and mar resistance.

D3WG12 Aqua BK00102 03/2026 PA-GF60 BASF Corporation Ultramid® D3WG12 Aqua BK00102 is a 60% glass reinforced, injection molding polyamide offering high strength and stiffness. Due to inherently lower moisture absorption, Ultramid® D3WG12 Aqua BK00102 shows improved retention of

B3ZG8 HB BK23309 03/2026 PA6-I GF40 Guoco Midtown #18-01, 128 Beach Road, Singapore 189773 B3ZG8 HB BK23309 is 40% glass fiber reinforced and impact modified PA6 grade for injection molding and high impact applications.

B3ZG7 OSI BK23273 10/2023 PA6-I-GF35 BASF Corporation Ultramid® B3ZG7 OSI BK2373 is a 35% glass reinforced, pigmented black, heat stabilized, impact modified Polyamide 6 injection molding grade. It was developed to meet demanding mechanical and chemical requirements for the automotive oil pan application.

B3ZG10 HSP UV BK30564 03/2026 PA6-GF50 BASF Corporation Ultramid® B3ZG10 HSP UV BK30564 is a 50% glass reinforced, black, heat stabilized, UV stabilized impact modified PA6 injection molding grade with very high stiffness, toughness and flow. Applications Potential applications in automotive exteriors, e.g. roof rack and roof rail, mirror housing etc, where extended UV protection is required. Also, this material can be used for structural applications that require high stiffness, strength and impact e.g. crash absorbers, stiffeners and pedestrian protection elements etc. Processing Guidelines Material Handling Max. Water content: 0.08% A dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level, however 2-4 hours is generally sufficient. Recommended moisture levels for achieving optimum surface qualities and mechanical properties at or below 0.08%. Typical Profile Melt Temperature 260-282°C (500-540°F); Suggested barrel setting 520°F Mold Temperature 80-95°C (176-203°F); Preferred 180°F Injection and Packing Pressure 35-125 bar (500-1800psi) Mold Temperatures This product can be processed over a wide range of mold temperatures; however, for applications where aesthetics are critical, a mold surface temperature of 80-95°C (176-203°F) is required. Pressures Injection pressure controls the filling of the part and should be applied for 90% of ram travel. Packing pressure affects the final part and can be used effectively in controlling sink marks and shrinkage. It should be applied and maintained until the gate area is completely frozen off. Back pressure can be utilized to provide uniform melt consistency and reduce trapped air and gas. Minimal back pressure should be utilized to prevent glass breakage. Fill Rate Fast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate.